Undeposited Funds is a temporary holding account in QuickBooks Online. Customer payments sit there until you group them into a bank deposit that matches what actually hit your bank. For a marina, it is the right place for slip rent checks, fuel dock receipts and ship store sales on the day they are received. It becomes a problem only when payments are never moved out, or when the same money is recorded twice. This guide covers how to record, deposit, match and clean up.
TL;DR
- Undeposited Funds holds payments between "received" and "in the bank." Every payment placed there must later be moved into a Bank Deposit.
- Select the payments that match your deposit slip or processor payout, so the QuickBooks deposit equals the bank record to the cent.
- Choose Match, not Add, when a bank-feed line corresponds to a payment you already recorded. Adding creates double-counted income.
- An old balance usually means money was deposited another way and the original receipt was stranded. Remove the duplicate and include the original payment in a correctly dated deposit.
- Automating billing and syncing it to QuickBooks Online reduces the manual entry that creates these problems in the first place.
Table of Contents
- What Undeposited Funds actually is
- Why marina payments land there so often
- How to record a payment into Undeposited Funds
- How to build the bank deposit
- Processor payouts, fees and timing
- Matching bank-feed lines without duplicating income
- Why a payment still shows as undeposited
- A checklist for an old or growing balance
- A month-end routine for marina offices
- Our perspective: fewer manual deposits, fewer stranded payments
- Reducing the problem at the source
- Reconciling after a sync
- See how Atlantis handles billing and QuickBooks sync
- FAQ
- Sources
What Undeposited Funds actually is
In QuickBooks Online, Undeposited Funds (also shown as Payments to Deposit) is where funds from customer payments are added until you deposit them into your bank account, according to Intuit's own help documentation. It is a default account, so it cannot be deactivated or used for any other purpose.
The simplest way to think about it: it is the envelope on the dockmaster's desk. A check arrives, you record it against the invoice, and it sits in the envelope. When someone drives to the bank, the envelope's contents become one deposit. The ledger should look exactly like the bank slip.
That is the whole reason the account exists. Your bank does not show five separate lines for five checks you deposited together. It shows one. If QuickBooks recorded each check straight into checking, your register would never match your statement, and reconciliation would turn into guesswork.

When QuickBooks recommends the workflow
Intuit recommends using Undeposited Funds when you deposit more than one payment at the bank, haven't connected your bank or card accounts, or take invoice payments that are not processed with QuickBooks Payments. Each of those describes a normal day at a marina office.
Why marina payments land there so often
Marinas collect money through more channels than most small businesses. A single week in season can include:
- Slip and mooring rent: monthly or seasonal checks, ACH transfers and card payments from members and transients.
- Dry stack and storage fees: recurring charges, often paid in batches around launch season.
- Lift and haul-out charges: paid at the counter or billed afterward.
- Fuel dock sales: card receipts, cash and house account charges, usually end-of-day totals.
- Ship store sales: point-of-sale tickets that need to roll up into one daily deposit.
- Service and yard work: deposits taken when the work order opens and balances collected at pickup.
- Electric and utility charges: metered usage billed after the fact.
Each channel pays out on its own schedule. Checks go to the bank when someone has time. Card and ACH money arrives as a processor payout, which can combine many sales into one lump. If every one of those were posted straight to checking, nothing would line up. Undeposited Funds is the staging area that lets you assemble each real-world deposit before it is recorded.
How to record a payment into Undeposited Funds
For a payment against an existing invoice, the QuickBooks Online steps are these, per Intuit's guide to depositing payments:
- Select + Create, then Receive payment. For a counter sale with no invoice, choose Sales receipt instead.
- Select the customer, then tick the invoice the payment applies to.
- In the Deposit to dropdown, choose Undeposited Funds.
- Complete the remaining fields, such as payment date, method and reference number, and save.
Two habits make a large difference for a marina.
Use the check number or reference. When the slip-holder's check is recorded with its number, building the deposit later takes a minute rather than twenty.
Record the payment date, not today's date. If a check arrived Friday and you key it Monday, the payment date should still say Friday. Cutoffs and seasonal reporting depend on it.
How to build the bank deposit
Once the payments are in Undeposited Funds, the move to the bank is a second, separate step. According to the same Intuit guide:
- Select + New, then Bank deposit.
- Pick the bank account the money is going into.
- In Select the payments included in this deposit, QuickBooks lists everything sitting in Undeposited Funds.
- Tick only the payments that are on your physical deposit slip or in the payout.
- Confirm the total equals the bank record, then save.
That last check is the discipline that keeps everything honest. If the QuickBooks total is $4,310.00 and the bank shows $4,310.00, the deposit is right. If they differ, a payment is missing or one has been included that was not on the slip. Find the difference before saving.
Splitting a deposit across income accounts
Marinas often want slip rent, fuel and ship store revenue to land in different income accounts. The practical approach, as described in community guidance for QBO, is to create the invoice or sales receipt with line items tied to the correct income accounts, receive the payment into Undeposited Funds, then select those payments in the bank deposit window. The income is categorized when the sale is created. The deposit only moves money from the holding account to the bank. Keeping those two jobs separate is what keeps your reports clean.
Processor payouts, fees and timing
Card and ACH payments behave differently from checks. A payment processor typically pays out a batch: many individual sales, minus fees, arriving as one net amount a day or two after the sales happened. Two things follow.
The bank deposit will be smaller than the gross sales. If the processor takes its fee before paying out, a $5,000 day of sales might arrive as a slightly smaller deposit. The fee is an expense and needs its own line or account, so the gross revenue stays accurate.
The payout lands after the sale date. A Friday and Saturday sales batch may reach the bank Monday or Tuesday. At month-end, that gap can leave a legitimate balance in Undeposited Funds that is not an error.
The cleanest habit is to reconcile at the payout level rather than the individual sale level. Take the processor's payout report, compare gross sales, refunds, fees and net payout, then build a single bank deposit that includes the gross payments and a negative line for fees. The deposit total then equals the net amount in the bank feed. After you match it, the holding balance for that batch should be zero.

If you take payments through more than one tool, such as a fuel dock terminal, a ship store terminal and online invoice payments, keep each one's payouts separate. Mixed batches are the most common reason a deposit refuses to tie out.
Matching bank-feed lines without duplicating income
If your bank is connected, QuickBooks will offer each incoming bank line in the For review tab. This is where most duplicate income is born. The line looks like new money, the Add button is right there, and clicking it books the same revenue a second time.
Intuit's duplicate transaction guidance is clear on the principle: match instead of add. In practice:
- If the bank line corresponds to a deposit you already built from Undeposited Funds, Match it to that deposit.
- If you already clicked Add on a line that had an existing payment, undo the added deposit and match it to the payment instead.
- If a transaction was added from the feed in error, undo it back to For review, then match it to the record you already have, or exclude it.
The habit worth building into every bookkeeping session: before you click Add, ask whether you or a teammate already recorded this money. In a marina with a front desk, a fuel dock and a ship store all taking payments, the answer is often yes.
Why a payment still shows as undeposited
This is the question behind most of the search results for this topic. You know the money is in the bank, yet QuickBooks insists it is undeposited. The usual causes:
- The money was deposited another way. Someone created a manual deposit or a sales receipt for the same funds, leaving the original payment stranded in Undeposited Funds, as one bookkeeping provider explains.
- A bank-feed line was added as new income. The money exists twice: once as a payment waiting for deposit and once as an added deposit.
- The payment went straight to the bank while also sitting in Undeposited Funds.
How to fix it
For the third case, Intuit's instructions are specific. Reopen the payment and set Deposit to as Undeposited Funds, then save. Next, open the bank deposit that matches your statement, tick the checkbox for the payment, and save. Finally, delete the deposit that no longer matches your statement.
For a stranded receipt after a hand-entered deposit, remove the duplicate deposit or sales receipt and include the original payment in a correctly dated bank deposit. Date matters: if you use today's date for a deposit that cleared in July, your July reconciliation will stay out of balance.
A checklist for an old or growing balance
Run this when Undeposited Funds holds more than a few days of receipts, or when the option to make a deposit seems to be missing.
- Open the account register and sort by date. The oldest items are the first suspects.
- Compare each old item to your bank statement. Was the money deposited? If yes, find which deposit carried it.
- Look for duplicate deposits or sales receipts for the same amount and date.
- Check the For review tab for lines that were added instead of matched.
- Group what is genuinely pending into a new deposit, using the real deposit date.
- Confirm the balance reflects only money that is physically or electronically in transit.
At any given moment, Undeposited Funds should hold a small, explainable amount: Friday's checks, Monday's processor payout. If you cannot explain a line in a sentence, it is probably stranded.
A month-end routine for marina offices
A short routine, done weekly in season and at least at every month-end, keeps the problem from compounding.
- Daily: record every payment with the right method, reference and payment date, always into Undeposited Funds unless your processor posts directly.
- At each bank trip or payout: build the deposit from the matching payments, and confirm the total against the slip or payout report.
- Weekly: clear the For review tab by matching, not adding.
- Month-end: review Undeposited Funds. Anything older than the normal deposit lag gets investigated before you reconcile the bank account.
Seasonal marinas should add one more step: before the spring rush of slip and storage payments, clear the account to zero. Starting the busy season with old stranded items makes every later problem harder to trace.
Our perspective: fewer manual deposits, fewer stranded payments
Undeposited Funds is a sound accounting tool. The trouble is that it depends on people doing a second step correctly, every time, across several payment channels. At a busy marina, that is where errors creep in.
We built Atlantis Marina around a different premise: the payment should be billed, collected and booked from the same record. Invoicing, autopay, Instant Pay, Stripe and ACH processing, refunds and adjustments, and QuickBooks Online sync all run inside one platform, so staff are not retyping receipts into a second system.
That matters most for the situations that create stranded funds: a boater paying through a link, a refund issued after a payout, a split between rent and fuel. When the customer account, the invoice and the payment share one history, reconciliation becomes a review of totals instead of a hunt for missing pieces.
The accountant still owns the books, and QuickBooks still does the accounting. Our job is to make sure what reaches it is complete and consistent.
John R
Reducing the problem at the source
Most Undeposited Funds trouble traces back to manual entry. A few workflow changes in your marina system help more than any cleanup routine.
Bill in bulk, collect digitally. Sending every slip invoice at once with bulk billing for marinas gives each boater a payable invoice, and fewer checks to hand-key.
Give boaters a payment link. With Pay Now and Instant Pay links, boaters pay an invoice directly, and the payment is tied to that invoice from the start.
Let boaters manage autopay. Boaters can manage their wallet, autopay and receipts themselves, which cuts the recurring payments staff would otherwise chase and record.
Give boaters visibility. When they can review invoices, balances and payment status, fewer calls come in asking whether a payment was received.
Handle refunds in a defined sequence. A refund after a payout is a classic reconciliation snag. A set process, such as a six-step marina refunds workflow, keeps it traceable.
Route large rent payments deliberately. If you want big rent payments to go by ACH rather than card, split tender payments are one way to steer them.
Keep one account per customer. Duplicated customer records lead to payments applied to the wrong profile. Customer account linking keeps billing unified.
Reconciling after a sync
If your marina software syncs with QuickBooks Online, the reconciliation question changes slightly. You are no longer typing the payment, but you still confirm that what synced matches the bank. Our guide on how to reconcile QuickBooks Online after a marina sync walks through that review, and the article on QuickBooks Online sync errors and fixes for marinas covers what to do when a record does not come across cleanly.
If you are weighing options for the connection itself, see our overview of marina QuickBooks integration alternatives.
The principle stays the same either way: match, do not add, and finish each deposit before starting the next.
See how Atlantis handles billing and QuickBooks sync
Atlantis Marina is a cloud-based platform that puts reservations, vessel records, billing, payments and QuickBooks Online sync in one place. Contracts are signed with Atlantis E-Sign, boaters pay by autopay, Instant Pay, Stripe or ACH, and the results sync to QuickBooks Online so revenue is billed, collected and booked without manual entry.

Plans start at $150 per month for Micro, with Small at $300, Medium at $500 and Large at $900 per month. Enterprise pricing is not published. Setup is a one-off fee of $100 to $1,000. See plans and pricing, take the platform overview tour, or explore marina management software from Atlantis.
FAQ
Should every marina payment go through Undeposited Funds?
Not necessarily. Intuit recommends the workflow when you deposit several payments together, have not connected your bank, or take invoice payments outside QuickBooks Payments. If a payment processor already posts payouts to the bank in a way you can match, follow your accountant's guidance on how to record them.
Why does my deposit total not match the bank?
Usually a payment is missing from the deposit, or one was included that was not on the slip. With processor payouts, fees are the common cause: the bank shows the net amount, so the fee must be entered as a negative line in the deposit. Compare the payout report line by line.
Can I delete the Undeposited Funds account to stop the clutter?
No. It is a default account in QuickBooks Online and cannot be deactivated or used for another purpose. The fix is to move payments out through bank deposits, and to remove duplicates, rather than to remove the account.
What is the difference between Match and Add in the bank feed?
Match links a bank line to a record you already have, so income is counted once. Add creates a new transaction from the bank line. If the money was already recorded as a payment or deposit, Add double counts it, so Match is the right choice.
Does Atlantis Marina replace QuickBooks?
No. Atlantis handles marina operations, billing and payments, then syncs to QuickBooks Online, which stays your accounting system. The aim is to reduce manual entry between the two.
Sources
- Manage default and special accounts in QuickBooks Online (Intuit)
- Deposit payments into the Undeposited Funds account in QuickBooks Online (Intuit)
- Fix duplicate transactions in QuickBooks Online bank feeds (Intuit)
- Deposit | QBO Support
- How to Clear Undeposited Funds in QuickBooks Online
